DCT T-Wrench for 1/4in-20 Inserts – T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation

For more information go to www. P65warnings. Ca. Gov. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. Easy to use: tap or drill a hole in lumber or other type of wood application that is the size of the insert not counting the threads, screw the T-wrench into a threaded insert, and use a 14"-20 threaded machine screw into the insert to screw into the wood until it is flush or slightly below the surface of the wood; It is important to use the correct wood drill size and correct screw size; Not intended for threaded insert removal once installed.

. The dct t-wrench for 1/4"-20 inserts - t-shape handle screw tool, Insert Installer, Threaded Insert Installation helps you manually Install 1/4"-20 threaded inserts straight without damaging the wood or fastener. Effortlessly install inserts: use the dct t-wrench for 1/4"-20 inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation to install inserts straight with plenty of leverage as you push down to avoid having the wood pull up around it.

Protect your application: t-shaped wrench helps you manually Install 1/4"-20 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more. If you wish to remove a threaded insert, wrench the nut down tightly on top of the insert, thread a nut onto a bolt, screw the bolt into the insert, and then back the bolt-nut-insert assembly out of the wood.

Installation of threaded inserts is a critical step in repairing tables, benches, and more. Grip comfortably: wrench includes a 2.

E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length Pack of 25

Ideal for use in woods Like Oak, Cherry, and Maple. Designed for use in furniture, Cabinetry, Storm Windows and Tap Handles. Ideal for applications ranging from furniture to cabinetry to tap handles, E-Z LOK Knife Threads are easily installed using a bolt and jam nut or optional drive tool. Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool.

E-z lok knife thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. 500" length Pack of 25. Threaded insert, 1/4"-20 internal Threads, Brass, knife thread, 0.

Provides a strong Machine Thread In Hard Woods. Proprietary external knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation.


Similar products

"T" Wrench for 1/4"-20 Inserts
E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6
DCT T-Wrench for 1/4in-20 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok 400-5 Threaded Insert, Brass, Knife Thread, 5/16"-18 Internal Threads, 0.625" Length (Pack of 10)
E-Z Lok 400-6 Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)
E-Z Lok 400-008 Threaded Insert, Brass, Knife Thread, #8", 8-32 Internal Threads, 0.375" Length (Pack of 25)
1/4-20 x 1" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere
E-Z LOK Drive Tool - Optional - Use with 329-6, 329-601, 329-624, 303-6, 303-624, 319-6, 319-624, 335-6, 450-10, 550-6, 650-10, 650-10F, 453-10, 653-10, 653-10F, 400-6, 400-624,
1/4-20 x 3/4" Button Head Socket Cap Screws 18-8 Stainless Steel, Quantity 25, Allen Hex Drive by Fastenere
40Pcs Anwenk 1/4"-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment


Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6 - Optional - E-Z LOK Drive Tool

Drive tool - optional - use with 329-4, 450-6, 400-428, 319-428, 400-4, 303-428, 329-401, 650-6, 319-4, 303-4, 550-1420, 329-428, 335-4, 400-M6. Designed for use in furniture, Cabinetry, Storm Windows and Tap Handles. Speeds High Volume Installations. 500" length Pack of 25. Optional Drive Tool. Provides a strong Machine Thread In Hard Woods.

Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool. Ideal for use in woods Like Oak, Cherry, and Maple. Threaded insert, knife thread, Brass, 1/4"-20 internal Threads, 0. Fits in Standard Power Drill. Installation drive tool for use with slotted E-Z LOK inserts metal and hard wood, fits in standard power drill.

For use with 1/4-20, 1/4-28, and M6 x 1. 0 inserts.


Similar products

E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
"T" Wrench for 1/4"-20 Inserts
E-Z Lok 400-5 Threaded Insert, Brass, Knife Thread, 5/16"-18 Internal Threads, 0.625" Length (Pack of 10)
E-Z LOK EZ-A400 Threaded Inserts for Wood; Assortment Kit; Brass, Plain
DCT T-Wrench for 1/4in-20 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok 400-6 Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)
E-Z Lok 400-4-CR 400-4 Threaded Insert, Stainless Steel, 0.500" L, Knife Thread, 1/4"-20 Internal Threads, 0.625", 18-8 Stainless Steel (Pack of 10)
E-Z Lok 400-332 Threaded Insert, Brass, Knife Thread, 10-32 Internal Threads, 0.500" Length (Pack of 25)
E-Z Lok 400-008 Threaded Insert, Brass, Knife Thread, #8", 8-32 Internal Threads, 0.375" Length (Pack of 25)
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/4"-20 Internal Threads, 7/16"-14 External Threads, 0.437" Length, Made in US (Pack of 10)


E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 13mm Length Pack of 100

Fits in Standard Power Drill. Threaded insert, 1/4"-20 internal Threads, knife thread, Brass, 0. Provides a strong Machine Thread In Hard Woods. Ideal for use in woods Like Oak, Cherry, and Maple. Speeds High Volume Installations. Ideal for use in materials such as pine, and MDF, composition board, plywood, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration.

Tapered external Threads Resist Pull-Out Caused By Vibration. 500" length Pack of 25. Optional Drive Tool. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications. Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool.

Ideal for use in pine, Plywood, Composition Board, and MDF. Designed for use in applications such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates. Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool. E-z lok hex drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired.

Drive tool - optional - use with 329-4, 303-4, 329-428, 400-428, 550-1420, 303-428, 450-6, 329-401, 319-428, 319-4, 400-4, 335-4, 650-6, 400-M6. Provides a strong Machine Thread In Soft Woods.


Similar products

E-Z LOK Drive Tool For Hex Drive Inserts - Optional - Use with 1/4-20 internal thread
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #10-24 Internal Threads, 0.394" Length (Pack of 50)
Whiteside 6210 CNC Spoilboard Surfacing Router Bit, 1/4\" Shank
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, #8-32 Internal Threads, 10mm Length (Pack of 100)
Parts Express Speaker Gasketing Tape 1/8" x 3/8" x 50 ft. Roll
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 25mm Length (Pack of 50)
1/4"-20 T-Nuts | 100pc | by Bolt Dropper, Pronged Tee Nut. for Wood, Rock Climbing Holds, Cabinetry
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 5/16"-18 Internal Threads, 0.512" Length (Pack of 50)
1/4-20 x 1-1/2" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere


T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation - DCT T-Wrench for 5/16in-18 Inserts

Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool. Provides a strong Machine Thread In Hard Woods. Grip comfortably: wrench includes a 2. 75-inch 7cm long handle that is the perfect size for complete coverage, less user fatigue, and more productivity; 4-inch 102cm overall height.

Fits in Standard Power Drill. Protect your application: t-shaped wrench helps you manually Install 5/16"-18 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more. Threaded insert, 1/4"-20 internal Threads, knife thread, Brass, 0.

Speeds High Volume Installations. Effortlessly install inserts: use the dct t-wrench for 5/16"-18 inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation to install inserts straight with plenty of leverage as you push down to avoid having the wood pull up around it. Ideal for use in pine, Composition Board, Plywood, and MDF.

Designed for use in applications such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates. Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool. Designed for use in furniture, Cabinetry, Storm Windows and Tap Handles. If you wish to remove a threaded insert, screw the bolt into the insert, thread a nut onto a bolt, wrench the nut down tightly on top of the insert, and then back the bolt-nut-insert assembly out of the wood.




Similar products

E-Z Lok 400-5 Threaded Insert, Brass, Knife Thread, 5/16"-18 Internal Threads, 0.625" Length (Pack of 10)
DCT T-Wrench for 1/4in-20 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
DCT T-Wrench for 3/8in-16 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
E-Z LOK Drive Tool - Optional - Use with 329-5, 329-501, 329-524, 303-5, 303-524, 319-5, 319-524, 335-5, 450-8, 550-5, 650-8, 453-8, 653-8, 400-5, 400-524, 400-M8
E-Z Lok 400-6 Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)
POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Bolts and Washers(Set of 10)
"T" Wrench for 1/4"-20 Inserts
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 5/16"-18 Internal Threads, 0.512" Length (Pack of 50)
20 8oz Disposable Graduated Clear Plastic Cups for Mixing Paint, Stain, Epoxy, Resin


DCT T-Wrench for 3/8in-16 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation

Installation of threaded inserts is a critical step in repairing tables, benches, and more. 500" length Pack of 25. Optional Drive Tool. Drive tool - optional - use with 329-4, 650-6, 319-428, 400-428, 303-4, 550-1420, 319-4, 335-4, 303-428, 329-428, 400-4, 329-401, 450-6, 400-M6. Provides a strong Machine Thread In Soft Woods.

This t-style wrench is not intended for threaded insert removal once installed. Protect your application: t-shaped wrench helps you manually Install 3/8"-16 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more. Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool.

Package contents: package includes 1 T-wrench; 5/16"-18 threaded inserts required, not included. Easy to use: tap or drill a hole in lumber or other type of wood application that is the size of the insert not counting the threads, screw the T-wrench into a threaded insert, and use a 14"-20 threaded machine screw into the insert to screw into the wood until it is flush or slightly below the surface of the wood; It is important to use the correct wood drill size and correct screw size; Not intended for threaded insert removal once installed.

Simply drill a hole that is the size of the insert not including the threads, screw the T-wrench into a threaded insert, and use a 14"-20 threaded screw in the insert to screw into the wood. Ideal for use in woods Like Oak, Cherry, and Maple. Designed for use in furniture, Cabinetry, Storm Windows and Tap Handles.

.


Similar products

E-Z Lok 400-6 Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)
E-Z LOK Drive Tool - Optional - Use with 329-6, 329-601, 329-624, 303-6, 303-624, 319-6, 319-624, 335-6, 450-10, 550-6, 650-10, 650-10F, 453-10, 653-10, 653-10F, 400-6, 400-624,
E-Z LOK 400-6 Threaded Inserts for Wood, Installation Kit, Brass, Includes 3/8-16 Knife Thread Inserts (5), Drill, Installation Tool
Beer Tap Handle Standard Ferrule and Hanger Bolt Set, 5 of Each (5)
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
DCT T-Wrench for 1/4in-20 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok 400-5 Threaded Insert, Brass, Knife Thread, 5/16"-18 Internal Threads, 0.625" Length (Pack of 10)
DCT T-Wrench for 5/16in-18 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8"-16 Internal Threads, 25mm Length (Pack of 25)
3/8 inch by 16 tpi Brass Threaded Inserts- 3/8 inch by 16 tpi Internal Threads - Ideal For Wood turners and General Contractors Pack of 10


E-Z Lok Threaded Insert, Zinc, Hex-Flush, 1/4"-20 Internal Threads, 0.512" Length Pack of 100

Protect your application: t-shaped wrench helps you manually Install 5/16"-18 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more. Ideal for use in pine, Plywood, Composition Board, and MDF. Designed for use in applications such As Ready-To-Assemble Furniture, Display Case, Drawer Pulls, and Shipping Crates.

Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool. Fits in Standard Power Drill. Drive tool - optional - use with 329-4, 335-4, 450-6, 400-428, 550-1420, 329-401, 329-428, 650-6, 303-428, 319-4, 319-428, 303-4, 400-4, 400-M6. Provides a strong Machine Thread In Soft Woods.

Effortlessly install inserts: use the dct t-wrench for 3/8"-16 inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation to install inserts straight with plenty of leverage as you push down to avoid having the wood pull up around it. Tapered external Threads Resist Pull-Out Caused By Vibration.

Ideal for use in pine, Plywood, Composition Board, and MDF. Designed for use in applications such As Ready-To-Assemble Furniture, Drawer Pulls, Display Case, and Shipping Crates. Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool. Provides a strong Machine Thread In Soft Woods.




Similar products

E-Z Lok Threaded Insert, Zinc, Hex-Flush, 1/4"-20 Internal Threads, 0.789" Length (Pack of 50)
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 13mm Length (Pack of 100)
E-Z LOK Drive Tool For Hex Drive Inserts - Optional - Use with 1/4-20 internal thread
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
E-Z Lok Threaded Insert, Zinc, Hex-Flush, 5/16"-18 Internal Threads, 0.789" Length (Pack of 50)
Whiteside 6210 CNC Spoilboard Surfacing Router Bit, 1/4\" Shank
DCT T-Wrench for 1/4in-20 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 25mm Length (Pack of 50)
HQMaster CNC Router Bits 1/8 Router Bit 1 8 End Mill Flat Nose Carbide Endmill 2-Flute Spiral Upcut Milling Cutter Tool Set 17mm CEL, 38.5mm OAL for Wood Nylon Resin ABS Acrylic PVC MDF Hardwood 10Pcs
Whiteside Router Bits RD2100 Standard Spiral Bit with Down Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length


LQ Industrial 30pcs 15mm Furniture Screw-in Nut Carbon Steel Color Zinc Plated Bolt Fastener Connector Hex Socket Drive Threaded Insert Nuts For Wood Furniture Assortment 1/4-20

Grip comfortably: wrench includes a 2. 75-inch 7cm long handle that is the perfect size for complete coverage, less user fatigue, and more productivity; 4-inch 102cm overall height. Speeds High Volume Installations. Protect your application: t-shaped wrench helps you manually Install 5/16"-18 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more.

Grip comfortably: wrench includes a 2. 75-inch 7cm long handle that is the perfect size for complete coverage, less user fatigue, and more productivity; 4-inch 102cm overall height. Ideal for use in pine, Composition Board, Plywood, and MDF. Designed for use in applications such As Ready-To-Assemble Furniture, Display Case, Drawer Pulls, and Shipping Crates.

Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool. Tapered external Threads Resist Pull-Out Caused By Vibration. Package contents: package includes 1 T-wrench; 5/16"-18 threaded inserts required, not included. Package contents: package includes 1 T-wrench; 3/8"-16 threaded inserts required, not included.

Designed for use in furniture, Cabinetry, Storm Windows and Tap Handles. Pre-drill, the following is drilling specification reference, drill a well-sized hole first with tools, when the material is high-hardness, please enlarge the hole.


Similar products

Hard-to-Find Fastener 014973445713 Joint Connector Bolts, 1/4-20 x 1.18, Piece-10
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
Hard-to-Find Fastener 014973445775 Joint Connector Bolts, 1/4-20 x 1.97, Piece-10
1/4"-20 T-Nuts | 100pc | by Bolt Dropper, Pronged Tee Nut. for Wood, Rock Climbing Holds, Cabinetry
40Pcs Anwenk 1/4"-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment
1/4-20 x 1-1/2" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere
DCT T-Wrench for 1/4in-20 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Bolts and Washers(Set of 10)
LQ Industrial 30pcs 25mm Furniture Screw-in Nut Zinc Alloy Bolt Fastener Connector Hex Socket Drive Threaded Insert Nuts For Wood Furniture Assortment 1/4"-20
Hard-to-Find Fastener 014973174279 174279 Machine Screw, 1/4-20 x 1/2", Black, 20


E-Z Lok 400-6 Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length Pack of 10

Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. 500" length Pack of 25. Optional Drive Tool. Package contents: package includes 1 T-wrench; 3/8"-16 threaded inserts required, not included. Ideal for use in woods Like Oak, Cherry, and Maple. Ideal for use in pine, Plywood, Composition Board, and MDF.

Designed for use in applications such As Ready-To-Assemble Furniture, Display Case, Drawer Pulls, and Shipping Crates. Simply drill the appropriately Sized Hole and Install with Hex Key or Optional Drive Tool. Speeds High Volume Installations. Tapered external Threads Resist Pull-Out Caused By Vibration. Fits in Standard Power Drill.

Easy to use: tap or drill a hole in lumber or other type of wood application that is the size of the insert not counting the threads, screw the T-wrench into a threaded insert, and use a 14"-20 threaded machine screw into the insert to screw into the wood until it is flush or slightly below the surface of the wood; It is important to use the correct wood drill size and correct screw size; Not intended for threaded insert removal once installed.

Grip comfortably: wrench includes a 2. 75-inch 7cm long handle that is the perfect size for complete coverage, less user fatigue, and more productivity; 4-inch 102cm overall height. Threaded insert, 1/4"-20 internal Threads, knife thread, Brass, 0.


Similar products

E-Z LOK Drive Tool - Optional - Use with 329-6, 329-601, 329-624, 303-6, 303-624, 319-6, 319-624, 335-6, 450-10, 550-6, 650-10, 650-10F, 453-10, 653-10, 653-10F, 400-6, 400-624,
DCT T-Wrench for 3/8in-16 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z LOK 400-6 Threaded Inserts for Wood, Installation Kit, Brass, Includes 3/8-16 Knife Thread Inserts (5), Drill, Installation Tool
Beer Tap Handle Standard Ferrule and Hanger Bolt Set, 5 of Each (5)
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
E-Z Lok 400-5 Threaded Insert, Brass, Knife Thread, 5/16"-18 Internal Threads, 0.625" Length (Pack of 10)
AJS Beer Tap Handle Standard Ferrule and Hanger Bolt Set, 10 of Each
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8"-16 Internal Threads, 25mm Length (Pack of 25)
Bosch BL2160 33/64 In. x 6 In. Fractional Reduced Shank Black Oxide Drill Bit
E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6


40Pcs Anwenk 1/4"-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment

Speeds High Volume Installations. Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool. Drive tool - optional - use with 329-4, 400-428, 319-428, 329-428, 335-4, 400-4, 329-401, 550-1420, 319-4, 450-6, 303-428, 303-4, 650-6, 400-M6. Provides a strong Machine Thread In Soft Woods.

Protect your application: t-shaped wrench helps you manually Install 3/8"-16 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more. Standard internal hex socket type without burr and non-slip design. Usage: pre-drill /drill a well-sized hole suggest that the diameter of the hole is 9.

6 +/- 02mm, the length is about 18mm, then use a proper internal hex tool to screw in. Tips: 1. Provides a strong Machine Thread In Soft Woods. Easy to use: tap or drill a hole in lumber or other type of wood application that is the size of the insert not counting the threads, screw the T-wrench into a threaded insert, and use a 14"-20 threaded machine screw into the insert to screw into the wood until it is flush or slightly below the surface of the wood; It is important to use the correct wood drill size and correct screw size; Not intended for threaded insert removal once installed.

1/4"-20x15mm. 625" length Pack of 1040pieces pack of furniture Screws Threaded Inserts for Wood Furniture.


Similar products

1/4-20 x 1" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere
1/4-20 x 1-1/4" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere
1/4"-20 T-Nuts | 100pc | by Bolt Dropper, Pronged Tee Nut. for Wood, Rock Climbing Holds, Cabinetry
POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Bolts and Washers(Set of 10)
1/4-20 x 1-1/2" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere
1/4-20 x 3/4" Button Head Socket Cap Screws 18-8 Stainless Steel, Quantity 25, Allen Hex Drive by Fastenere
YUMORE Folding Shelf Brackets 12", Max Load: 330lb Heavy Duty Stainless Steel Collapsible Shelf Bracket for Table Work Bench, Space Saving DIY Bracket, Pack of 2
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
Kreg KMS7303 30-Inch Jig and Fixture Bar
Kreg KMS7801 Standard Swing Stop


E-Z Lok 400-5 Threaded Insert, Brass, Knife Thread, 5/16"-18 Internal Threads, 0.625" Length Pack of 10

Drive tool - optional - use with 329-4, 329-428, 650-6, 400-4, 550-1420, 450-6, 303-428, 319-4, 329-401, 319-428, 335-4, 303-4, 400-428, 400-M6. Provides a strong Machine Thread In Soft Woods. Provides a strong Machine Thread In Hard Woods. Designed for use in furniture, Cabinetry, Storm Windows and Tap Handles.

Easy to use: tap or drill a hole in lumber or other type of wood application that is the size of the insert not counting the threads, screw the T-wrench into a threaded insert, and use a 14"-20 threaded machine screw into the insert to screw into the wood until it is flush or slightly below the surface of the wood; It is important to use the correct wood drill size and correct screw size; Not intended for threaded insert removal once installed.

Tapered external Threads Resist Pull-Out Caused By Vibration. Simply drill the appropriately Sized Hole and Install with Bolt/Jam Nut or Optional Drive Tool. Proprietary external knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation.

Package contents: package includes 1 T-wrench; 3/8"-16 threaded inserts required, not included. E-z lok knife thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Protect your application: t-shaped wrench helps you manually Install 3/8"-16 threaded inserts straight without damaging your application's wood or fastener so you can easily repair a table, a workbench, and much more.

Ideal for use in woods Like Oak, Cherry, and Maple.


Similar products

E-Z LOK Drive Tool - Optional - Use with 329-5, 329-501, 329-524, 303-5, 303-524, 319-5, 319-524, 335-5, 450-8, 550-5, 650-8, 453-8, 653-8, 400-5, 400-524, 400-M8
E-Z Lok 400-4 Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)
E-Z Lok 400-6 Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)
E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6
E-Z LOK Drive Tool - Optional - Use with 329-6, 329-601, 329-624, 303-6, 303-624, 319-6, 319-624, 335-6, 450-10, 550-6, 650-10, 650-10F, 453-10, 653-10, 653-10F, 400-6, 400-624,
DCT T-Wrench for 5/16in-18 Inserts - T-Shape Handle Screw Tool, Insert Installer, Threaded Insert Installation
E-Z Lok 400-008 Threaded Insert, Brass, Knife Thread, #8", 8-32 Internal Threads, 0.375" Length (Pack of 25)
E-Z Lok Threaded Insert, Zinc, Hex-Flush, 5/16"-18 Internal Threads, 0.789" Length (Pack of 50)
"T" Wrench for 1/4"-20 Inserts
E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 5/16"-18 Internal Threads, 25mm Length (Pack of 25)