Top 10 125KHz Key Fob – Computer Memory Card Readers

As an Amazon Associate I earn from qualifying purchases.

1. SYWAN

#ad

English 10 Frequency NFC RFID Card Copier Writer Reader Duplicator for IC ID Cards and All 125kHz Cards,10 Pcs ID 125khz Cards + 10pcs ID 125kh Key Fobs + 10pcs 13.56mhz IC Key + 1 USB

#ad
SYWAN #ad - By its decoding software, but not all. To crack a encryption card, does not support all sectors encryption IC card. If your card is all sectors encryption, you need to connect the reade to a PC. The machine is plugged into the computer, open the removable disk and display the software and manual word files, the software instructions inside are copied to the computer.

Note: the software of our machine is only compatible with Windows system, it may work for most half-encrypted cards, not working with MAC system or Linux system; It doesn't work for fully-encrypted cards. Support 10 frequency: id-125khz, id-500khz, id-625khz, ic13.56mhz iso1443a/b, id-750khz, id-875khz, id-250khz, id-1000khz, id-375khz, HID125kHz Prox cards.

At this time, the software will not be displayed. This device only supports partial sector encryption ic card, the device will show ‘’Decoding fails, please try to decode an upgraded version!’’ Come with decoding software working on Windows. Note: if you press the "ok" button before opening the software, do not press the "OK" button on the machine. Enter my computer, there is a disclaimer when it is turned on. It can crack 13. 56mhz encryption cards.
BrandSYWAN #ad
ManufacturerBig waves #ad
Part NumberNFC-012

2. Lexi

#ad

RFID Smart Card Reader Writer, LEXI RFID NFC Duplicator, 13.56MHz Encrypted Programmer, USB Interface, with UID/T5577 Writable Key Cards and Software, 125KHz Key fob Copier

#ad
Lexi #ad - Working frequency125khz / 13. 56 mhz, support ic / ID dual frequency replication. Led warning light / buzzerthe led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders.

Usb full speed efficient1. 2 meters long usb transmission line connected to the device, no need to install a driver, respond immediately, quickly read the card number. Lightweight and easy to useabS flame-retardant material shell, small size and thin, high-quality microchip control inside, fast card reading effect. You can also download the software via the link in the "NOTE" section below this product page. Obtain the software when you connect this product to a computer, you can find the software on the computer.
BrandLexi #ad
ManufacturerLEXI #ad
Height0.5 Inches
Length4.3 Inches
Weight0.31 Pounds
Width2.7 Inches
Part NumberNS106

3. JYT-TOOLS

#ad

NFC RFID Copier Writer Readers Key Copier Duplicator English 10 Frequency for IC ID Cards/Key Fob and 13.56mhz UID Key,10pcs ID 125kh Key Fobs + 5 Pcs ID 125khz Cards + 10pcs 13.56mhz IC Key + 1 USB

#ad
JYT-TOOLS #ad - Note: it works for unencrypted cards. Support reading: em4100/em4200, ntag203, em4305, t5577, ultralight, uid cards, mifare classic, 1386/1326/1346; support writing: 1386/1326/1346, Mifare UID cards. It does not work for fully-encrypted cards! By its decoding software, it may work for some of half-encrypted cards, but not all. Id cards: 125 khz, 750 khz, 250 khz, 875 khz, 625 khz, 375 khz, 1000 kHz. Ic cards: 13. 56 mhz, 500 khz, 125 kHz prox card. Working frequencies.
BrandJYT-TOOLS #ad
ManufacturerJINGBOTAIDA CO.,LTD #ad
Height0.83 Inches
Length5.98 Inches
Width3.15 Inches
Part NumberFZQ-001

4. HFeng

#ad

HFeng NFC Smart RFID Copier/Writer/Readers/Duplicator 125KHz 13.56MHz USB Programmer Key fob Cards Reader Writer + T5577 / EM4305 UID Writable Keychains

#ad
HFeng #ad - Not all type encrypted cards. 5 has a usb interface, two-color led light prompt. 4 provide free software, very easy to use. Connect this device to your computer with the USB cable, then can find the software.

Can't support HID chip. Built-in buzzer "beep" sound reminder. 2 support card type: for 125khz id type: em4100, 8800, tk4100, t5577, em4305, 5200, 8265 etc. Support windows computer ONLY. Package including 1rfid copier + 1 usb cable + 5 rFID T5577 key fobs + 5 RFID UID key fobs. 1 this device is used to read and copy 125KHz and 13. 56mhz frequency RFID key cards. Mini and light weight. 3 support card type: for 13. 56mhz ic type: mi-fa re 1k, uid, cuid, ufuiD, FUID, ic half-encryption, IC Full-encryption etc.
BrandHFeng #ad
ManufacturerHFeng #ad

5. HFeng

#ad

HFeng Smart 10 English Frequency RFID Copier/Writer/Readers/Duplicator 125KHz 13.56MHz USB Programmer Key fob Cards Reader UID Decoder + T5577 / EM4305 Writable Keychains

#ad
HFeng #ad - The batteries not included. 2 support read write frequency: 125khz, 750khz, 1000khz, 625khz, 375khz, 250KHz, 500khz, 875KHz, 13.56mhz iso1443a/B.

Digital keys to enter the card number can be entered directly. 5 working with 4*aaa battery, standard handset, easy to carry. 3 support card read: em4100/em4200, Mi-fare classic, uiD cards, Ntag203. Package including 5pcs rfid t5577 keyfobs, 5pcs RFID UID keyfobs. 1 rfid smart copier. Id/ic full hand and voice broadcast In English. 4 support cards write: t5577, em4305, uiD cards. Has usb interface, come with free software. Hd 2. 8 inch full color screen, clear display, built-in multi-lingual.
BrandHFeng #ad
ManufacturerHFeng #ad

6. LIBO Smart Home

#ad

LIBO RFID NFC Duplicator ID/IC Card Reader Writer Encrypted Decoder USB Copier with 125KHz/13.56MHz Dual Frequency Writable Key fobs

#ad
LIBO Smart Home #ad - Can be connected to computer, very convenient. 5, package list: 1 * ns106 card duplicator; 1 * USB cable; 10 * Yellow RFID keyfobs.

1, working frequency: the working frequency of this card duplicator is 125KHz and 13. 56mhz. 3, usb function: this card copier is equipped with a USB cable. Built-in mobile disk with decoding software, support to decode 13. 56mhz encrypted card. 4, attention: if the original card you use to read is 125KHz card, then you should use same frequency rewritable card to copy it. 2, product features: support to read and write both 125khz rfid cards and 13. 56mhz rfid cards.
BrandLIBO Smart Home #ad
ManufacturerLIBO Smart Home #ad
Height1.18 Inches
Length4.33 Inches
Width3.94 Inches
Part NumberNS106+10Y
ModelNS106+10Y

7. TO BE SECOND

#ad

TO BE SECOND JASAG 13.56MHz IC Card Copier NFC Reader 125KHz RFID Reader Writer Duplicator Smart Card Programmer with IC Encrypted ID Composite Buckle Writable Key Fob Cards black NS106+3+3

#ad
TO BE SECOND #ad - Place the card on the card reader, ic semi-encryption card, and "x" indicates failure. 3. The software will scan and display the card number. 3. Indicates successful decryption, and press 'Write Type-A' on the software.

Place the card on the card reader and press ‘read eMID’ on the software to scan the card. 2. Efficient high-speed usb 1. 2 meters length usb transmission line connected to the device, respond immediately, no need to install a driver, quickly read the card number. Put a writable 13. 56mhz writable chip on the card reader, press ‘Read’ on the software to start decryption. 2. Read and write ordinary 125khz rfid card1.

Read and write 13. 56mhz ic, ic full encryption card1. Place a writable 125khz writable chip on the card reader, and press 'Write EMID' on the software. Obtain the software when you connect this product to a computer, you can find the software on the computer. If it doesn't displayed on your computer, you can also ask me for the software link. Working frequency 125khz / 13.
BrandTO BE SECOND #ad
ManufacturerTO BE SECOND #ad
Height0.5 Inches
Length4.3 Inches
Weight0.3 Pounds
Width2.7 Inches
Part NumberNS106+3+3
ModelNS106+3+3
Warranty1 year

8. HENA

#ad

Blue SCFZQ, with 10pcs Rewritable EM4305/T5577 Key Fobs Cards, Upgraded Handheld RFID Reader Writer Duplicator Copier, HENA HERNAS 125KHz Card Reader

#ad
HENA #ad - Compatible with most of 125khz rfid cards. Built-in buzzer and led. Reading distance is 0-6cm0-2. 4 inch. Widely used at home, office, elevator, school, community, hotel, and any other places need security surveillance or access control support.

Support em4100 id card, em4305 card, uid card, hid pr0xcard ii, hid iciass, 5200 card, T5577 card, awid card, and some type of HID card.5. Note: the applicability of our reader is limited, it cannot match all types of FRID cards. If your card is not the type listed by us, or if you don’t know the type of your card, please do not buy it, or you can consult me.3. 2. Thanks! Smart phone size, comfortable hand feeling. Working with 2pcs AAA batteries, easy to use and carry. 4. Please read our product description carefully. 1. Not support 13. 56mhz ic card or uhf, hid pr0xKey III.
BrandHENA #ad
ManufacturerHENA #ad
Height1.2 Inches
Length4.6 Inches
Weight0.3 Pounds
Width2.8 Inches
Part NumberSCFZQ+5+5
ModelSCFZQ

9. HongTie

#ad

English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 125kHz Cards +13.56mhz UID Key

#ad
HongTie #ad - Ic cards: 13. 56 mhz, 375 khz, 250 khz, 875 khz, 625 khz, 125 kHz prox card. Id cards: 125 khz, 750 khz, 500 khz, 1000 khz. Support read:em4100/em4200, em4305, t5577, ntag203, mifare classic, 1386/1326/1346;support cards write: 1386/1326/1346, Ultralight, UID cards, Mifare UID cards.

Working frequencies. Note: the applicability of our reader is limited, it cannot match all types of FRID cards. If your card is not the type listed by us, or if you don’t know the type of your card, please do not buy it!!! It can crack 13. 56mhz encryption cards. This device only supports partial sector encryption ic card, please try to decode an upgraded version!’’Come with decoding software working on Windows.

To crack a encryption card, the device will show ‘’Decoding fails, does not support all sectors encryption IC card. If your card is all sectors encryption, you need to connect the reade to a PC. Not compatible for iClass, awid, Indala and Keri cards. The software of our machine is only compatible with Windows system, not working with MAC system or Linux system. Please read our product description carefully.
BrandHongTie #ad
ManufacturerH&T Technology #ad
Part NumberHT-08CD-001
ModelHT-CARD-G001

10. HENA

#ad

NFC Reader, Free Software, RFID Reader Writer, Black ns106+5+5, 13.56MHz Encrypted Card Decoder, USB and Writable Key Fobs Cards, 125KHz Card Duplicator, HENA HERNAS New Version Smart Card Copier

#ad
HENA #ad - Efficient high-speed usb: 1. 2 meters 4 feet length usb transmission line connected to the device, respond immediately, no need to install a driver, quickly read the card number. If it doesn't displayed on your computer, you can also ask me for the software link.

1. Working frequency: 125khz / 13. 56 mhz, support ic / id dual frequency replication. Lightweight and easy to use: aBS flame retardant material shell, high-quality microchip control inside, small size and thin, fast card reading effect.33. Can read/write/copy/decode/delete most of 125KHz and 13. 56mhz rfid cards. Obtain the software: when you connect this product to a computer, you can find the software on the computer. Led warning light / buzzer: the led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders. 5. 2. 4.
BrandHENA #ad
ManufacturerHENA #ad
Height0.5 Inches
Length4.2 Inches
Weight0.3 Pounds
Width2.7 Inches
Part NumberHERNAS-NS106
Modelns106+5+5